တပ်ဆင်ချိန်မှာ မြန်ဖို့မလိုပါ။ မှန်ဖို့လိုပါတယ်။ အောက်ကအဆင့်တွေကို တစ်ဆင့်ပြီးတစ်ဆင့်လုပ်ပါ။
- Workspace ပြင်ပါ — စားပွဲသန့်၊ screw tray, manual, tools အဆင်သင့်ထားပါ။
- CPU တပ်ပါ — Motherboard ကို box ပေါ်တင်ပြီး CPU triangle mark ကို socket mark နဲ့ကိုက်အောင်တင်ပါ။ မဖိပါနဲ့။
- RAM တပ်ပါ — Motherboard manual အတိုင်း A2/B2 slot ကိုသုံးပါ။ Click သံကြားအောင်ညီညီဖိပါ။
- M.2 SSD တပ်ပါ — M.2 screw ဖြုတ်၊ SSD ကို angle နဲ့ထည့်၊ အောက်ဖိပြီး screw ပြန်တင်းပါ။
- CPU Cooler တပ်ပါ — Thermal paste လိုအပ်ရင် pea-size လိမ်းပါ။ Cooler plastic film ဖြုတ်ထားပါ။
- Case ပြင်ပါ — Side panels ဖြုတ်၊ standoffs မှန်မမှန်စစ်ပါ။
- Motherboard ထည့်ပါ — I/O shield built-in မဟုတ်ရင်အရင်တပ်ပါ။ Board ကို standoffs နဲ့ညီအောင်ထားပြီး screw တင်းပါ။
- PSU တပ်ပါ — Fan direction ကို case airflow နဲ့ကိုက်အောင်စဉ်းစားပါ။
- Power Cables ချိတ်ပါ — 24‑pin motherboard, 8‑pin CPU EPS, SATA power လိုအပ်တာတွေချိတ်ပါ။
- GPU တပ်ပါ — PCIe x16 slot ထဲညီညီထည့်ပြီး case bracket screw တင်းပါ။ GPU power cable ချိတ်ပါ။
- Front Panel Cables ချိတ်ပါ — Power switch, reset, LED, front USB/audio ကို manual အတိုင်းချိတ်ပါ။
- Case Fans ချိတ်ပါ — Fan headers သို့ fan hub ထဲချိတ်ပြီး intake/exhaust direction စစ်ပါ။
- Cable Management — Airflow မပိတ်အောင် cable တွေကို back side မှာသိမ်းပါ။
- First Boot Test — Monitor ကို GPU port မှာချိတ်၊ power switch on, ပထမဆုံး boot ကိုစောင့်ပါ။
- BIOS/UEFI ဝင်ပါ — CPU/RAM/SSD detect ဖြစ်မဖြစ်စစ်ပါ။
- XMP/EXPO Enable — RAM speed advertised value ရဖို့ enable လုပ်နိုင်ပါတယ်။ Stability မကောင်းရင် default ပြန်ထားပါ။
- OS Install — Windows USB drive နဲ့ boot တင်ပါ။
- Drivers Install — Chipset, GPU, Wi‑Fi/Bluetooth, Windows Update လုပ်ပါ။
- Temperature/Stability Test — Idle/load temperature, fan noise, restart issue ရှိမရှိစစ်ပါ။
Safety: Screw တစ်လုံး case ထဲကျန်ခဲ့ရင် power မဖွင့်ခင်ရှာထုတ်ပါ။ Metal screw တစ်လုံးက short ဖြစ်စေနိုင်ပါတယ်။
You should see
Build တပ်တဲ့အခါ 80% က preparation ပါ။ Manual ဖတ်ပြီး cable labels ကြည့်တာက “အချိန်ကုန်” မဟုတ်ပါ — အမှားကာကွယ်တာပါ။